News & Events
Master Handlers Participated in international Trade Show for the Forestry and Wood Industries at LIGNA HANNOVER 2011 held at Hannover, Germany
For more details Click Here.
Contact Us
Corporate Office :
17 of 17 / 1B
Kothrud Industrial Estate, Kothrud
Pune - 411 038
Maharashtra (India)
-
What is precure time in the lamination process? - If Precure time goes down by 1 sec the cycle time goes down by 3 sec.
- Precure time in MH press is usually 4-5 sec. -
Which are the Heating Media can be used in the process? - Steam
- Thermic fluid
- High pressure hot water
-
What can be manufactured in a Multi-opening press?1. High Pressure Laminates
2. Compact (Thicker laminates above 2 mm) used as partitions.
3. Densified Wood
4. Composites – used in Missile & satellite
5. Plywood
6. Shuttering Ply
7. Insulation boards – Used in transformers
8. UHMWPE
9. Industrial Laminates -
What are the types of boards available for pre lamination?1. Particle board / Chip board – But it has got limitations due to low density of 600 to 700 kg/cm3
2. MDF – Medium density fibre board
3. HDF – High Density fibre board – Usually used for flooring.
-
How to achieve high gloss in Pre-lamination?It can be done through the resin technology, Press Plates in the press, Smoothing roll in reverse direction on the impregnation.
-
Who are the good press plate manufacturers in the world?
Sesa Spa - Italy
HUECK Rheinische GmbH - Germany
Kings Mountain International - USA
Sandvik (Hindrichs Auffermann) - Netherland
Flai – Italy
-
Who are good printed paper manufacturers in the world?
INTERPRINT - Germany
Schattdecor AG - Germany
Süddekor - Germany
Technocell Dekor – Germany
Mead – USA
Lamigraf – Spain
-
Who are good sanding machine manufacturer?
IMEAS spa - Italy
Steinemann Schweiz - Switzerland
F.LLI TAGLIABUE s.p.a - Italy
KÜNDIG AG - Switzerland
Boere Machinefabriek BV - Netherland
SPB – Czech Republic
SCM – Italy
Plytouch – India
Sukoma – China
Anthon – Germany
Costo – Italy
-
Which are the most important parameters in a press?1. Temperature
2. Pressure
3. Time
-
What is impregnation? Impregnation is a process by which we fill in the voids in the paper / fabric molecular structure by resins.
-
What are the gsm of papers in HPL and SCL?In SCL the gsm of paper is – 72 to 120 gsm - Decor
In HPL the gsm of paper is – 72 to 120 gsm - Decor
In HPL the gsm of paper is – 80 to 240 gsm - Kraft
In Phenol Faced ply the gsm of paper is – 25 to 200 gsm – Kraft (RC 100% - 200%)
In HPL the gsm of paper is – 25 to 32 gsm - Tissue
In HPL the gsm of paper is – 60 to 72 gsm - Barrier
-
How to calculate the speed of IMP line?Speed of MF IMP line =
No. of drying zones X 3.75 meter (length of each drying zone) X 1.2 meter/min speed for each drying zone
Speed for PF IMP line =
No. of drying zones X 3.75 meter (length of each drying zone) X 4.75 meter/min speed for each drying zone
-
General information on Impregnator?
PF IMP MF IMP Kiss Coating
Not Necessary Necessary Skying
Not Necessary Motarised Skying Paper gsm
150 72 Paper Type
Kraft Unicolour/Print/Tissue Solid Resin
60 - 67 % rest water 50 - 54% rest water Impregnated Resin
28-30% ISO standard 50% ISO standard for HPL Paper Weight
80 - 250 gsm 30 - 120 gsm Reel Dia.
1500 mm 1000 mm Reel Wt.
1900 Kgs 1200 kgs Skying Height
600 mm fixed 1200 - 2400 mm variable Max. Temp
180 degree 160 degree Recirculation air
1500 per zone + 4000 1500 per zone + 4000 -
Who are good Cushion Pad manufacturers for SCL?
Marathon Belting Ltd., - UK
HUECK Rheinische GmbH - Germany
